Continue to work on wing as time permits. Learned plenty along the way, next wing will go better. Had to iron out several wrinkles in fabric, will cut holes for wing strut mounts prior to attaching lower side fabric next time. Applied upper fabric with 2 inch bond line on leading edge, 1 in trailing edge. Did initial 250 degree heat shrink with iron, continued to trim for jury strut and control pulleys. Used soldering iron to burn holes through fabric for rivets in lieu of lacing. Applied reinforcing tape, burnt holes, installed rivets. Next is to shrink at 300 and final 350 prior to applying Polybrush and tapes.